|
From underneath you can see the passenger- and driver-side intercooler brackets, both of which must be removed. Note that the drivers-side mounting studs are left on to mount the new bracket. Now would also be a good time to unbolt non-MPE frame braces if you've got 'em. They won't remount in the original locations with the MPE intercooler, since it hangs down lower--we learned this lesson the hard way. You have two choices here: you can re-drill the passenger side brace to clear after installation, or you can buy 1-inch-outer-diameter mild steel replacements from MPE for $90. View Related Article
|
|