0109Gmhtp Pumpingup20 Zoom
1988 Pontiac Firebird Formula 396 Short Block Engine Install - Pumping Up, Part 1
|
It's important to check the rod clearance for each cylinder prior to ring installation and final assembly. There should be a minimum of 60 thousandths clearance between the rotating assembly and cylinder bores, pan rails and cam journals. (There are technically seven places where interference can happen for each rod. With 8 pistons that's 56 possible trouble spots!) Aaron says the cam clearance issue is the most compelling reason for using a small base-circle cam like the one we're planning. It's important to check clearances with the piston and rod assigned to that bore--you can get into trouble if you use the same assembly on each cylinder. View Related Article
|
|
Chevy Corvette Research
Our comprehensive information will allow you to compare the new Chevy Corvette and review specs, photos and more. The 2010 Corvette goes for a suggested retail price of $74,285.00, and is available in the following bodystyles: Coupes, Convertibles. You may also be interested in the Chevy Camaro and the Pontiac G5.
|
|