GMHighTechPerformance Homepage

0111Gmhtp Pumping25 Zoom

0111Gmhtp Pumping25 Zoom

396 Stroker Motor - Air Induction - Pumping Up, Part 2
Installing the SuperRam runners isn't as easy as it looks in this photo. Aaron Strope and technician Roger Creech spent about an hour prepping the runners prior to installing them. This consisted of enlarging the bolt holes, massaging the Allen head fasteners (some needed to be cut slightly or the heads narrowed for clearance), and removing some of the rocker arms to get at the lower runner bolts. Note that the EGR valve and sensor pigtail has already been swapped over from our old manifold. View Related Article
0111Gmhtp Pumping01 Zoom 0111Gmhtp Pumping02 Zoom 0111Gmhtp Pumping04 Zoom 0111Gmhtp Pumping03 Zoom 0111Gmhtp Pumping05 Zoom 0111Gmhtp Pumping06 Zoom 0111Gmhtp Pumping07 Zoom
0111Gmhtp Pumping08 Zoom 0111Gmhtp Pumping09 Zoom 0111Gmhtp Pumping10 Zoom 0111Gmhtp Pumping11 Zoom 0111Gmhtp Pumping12 Zoom 0111Gmhtp Pumping13 Zoom 0111Gmhtp Pumping14 Zoom
0111Gmhtp Pumping15 Zoom 0111Gmhtp Pumping16 Zoom 0111Gmhtp Pumping17 Zoom 0111Gmhtp Pumping18 Zoom 0111Gmhtp Pumping19 Zoom 0111Gmhtp Pumping20 Zoom 0111Gmhtp Pumping21 Zoom
0111Gmhtp Pumping22 Zoom 0111Gmhtp Pumping23 Zoom 0111Gmhtp Pumping24 Zoom 0111Gmhtp Pumping25 Zoom 0111Gmhtp Pumping26 Zoom 0111Gmhtp Pumping27 Zoom 0111Gmhtp Pumping28 Zoom
0111Gmhtp Pumping29 Zoom 0111Gmhtp Pumping30 Zoom

 

 

Get Adobe Flash player

Car Research Guide