GMHighTechPerformance Homepage

0303HTP Breathe05zoom

Our third-gen Firebird required part of the hood support frame on the passenger side to be cut away in order to provide ample clearance for the 4-inch inlet pipe. The notch in the hood was then sealed with a urethane adhesive sealant from 3M. This will keep rubbing to a minimum and protect the exposed metal from rusting.
Custom 4-Inch Inlet Pipe - Breathe, Puppy, Breathe!

 Our third-gen Firebird required part of the hood support frame on the passenger side to be cut away in order to provide ample clearance for the 4-inch inlet pipe. The notch in the hood was then sealed with a urethane adhesive sealant from 3M. This will keep rubbing to a minimum and protect the exposed metal from rusting.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide