GMHighTechPerformance Homepage

0307HTP BaerBrake10 Z

Use a 12mm line wrench and a 5/8-inch wrench to disconnect the stock flex brake line from the car. Use a flathead screwdriver to remove the brake line clip. Now you can pull off the brake line. Hint: put a pan under the car to collect the brake fluid that will drip out. Since we were going to completely flush out all the old fluid, we didn't care how much came out.
Baer Track System - The Cold Baer Facts

 Use a 12mm line wrench and a 5/8-inch wrench to disconnect the stock flex brake line from the car. Use a flathead screwdriver to remove the brake line clip. Now you can pull off the brake line. Hint: put a pan under the car to collect the brake fluid that will drip out. Since we were going to completely flush out all the old fluid, we didn't care how much came out.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide