GMHighTechPerformance Homepage

0307HTP BaerBrake11 Z

After splitting the ball joint with a ball joint splitter and air hammer, remove the two strut bolts with a 24mm wrench and a 24mm impact socket. It goes without saying that the control arm should be firmly supported from below with a jack stand. Don't give the old brakes the heave ho yet--save the spindle to get your core charge refund from Baer.
Baer Track System - The Cold Baer Facts

 After splitting the ball joint with a ball joint splitter and air hammer, remove the two strut bolts with a 24mm wrench and a 24mm impact socket. It goes without saying that the control arm should be firmly supported from below with a jack stand. Don't give the old brakes the heave ho yet--save the spindle to get your core charge refund from Baer.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide