GMHighTechPerformance Homepage

0307HTP BaerBrake15 Z

Use a 12mm line wrench and an 11/16-inch wrench to install the braided Baer brake line on the chassis side. You can reuse the original clip to secure the line to the chassis. If you're only doing the fronts, you can move on to charging and bleeding the system, otherwise it's time to move on to the rear Touring system.
Baer Track System - The Cold Baer Facts

 Use a 12mm line wrench and an 11/16-inch wrench to install the braided Baer brake line on the chassis side. You can reuse the original clip to secure the line to the chassis. If you're only doing the fronts, you can move on to charging and bleeding the system, otherwise it's time to move on to the rear Touring system.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide