GMHighTechPerformance Homepage

0307HTP BaerBrake25 Z

On the driver side rear, the stock brake line needs to be bent over the axle and attached to the new stainless braided line from Baer. Use the clip and hose clamp provided by Baer to secure it to the axle. (Baer provides a very nice diagram of the new routing in its Touring kit.) Attach the other end of the braided line to the caliper with the copper washers and banjo bolt provided in the kit. Do not use Teflon sealant as particles can clog and block the fluid going into the caliper.
Baer Track System - The Cold Baer Facts

 On the driver side rear, the stock brake line needs to be bent over the axle and attached to the new stainless braided line from Baer. Use the clip and hose clamp provided by Baer to secure it to the axle. (Baer provides a very nice diagram of the new routing in its Touring kit.) Attach the other end of the braided line to the caliper with the copper washers and banjo bolt provided in the kit. Do not use Teflon sealant as particles can clog and block the fluid going into the caliper.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide