GMHighTechPerformance Homepage

0307HTP BaerBrake27 Z

You'll need to adjust the emergency brake cable in the tunnel with a Vise-Grip on the threaded rod and a 1/2-inch socket on the nut. This is best done with the driveshaft out of the car and the brake in the down position. While tightening the nut on the cable bracket, periodically check the tension on the cable. Make sure the caliper lever rests on its stop when the brake is disengaged.
Baer Track System - The Cold Baer Facts

 You'll need to adjust the emergency brake cable in the tunnel with a Vise-Grip on the threaded rod and a 1/2-inch socket on the nut. This is best done with the driveshaft out of the car and the brake in the down position. While tightening the nut on the cable bracket, periodically check the tension on the cable. Make sure the caliper lever rests on its stop when the brake is disengaged.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide