GMHighTechPerformance Homepage

0307htp Holleystealth08 Z

The under hood bracing surrounding the passenger-side louver indention and the small center "bump" that holds the center tab for the hood insulation are the places where clearance is tight. The small dot, left of the center "bump" and the line drawn on the "bump" were made by pushing a permanent marker through the most worn part of the hood insulation. A little trim here and there should give ample clearance, even without using an engine restraint.
Holley StealthRam Intake - Ram That TPI!

 The under hood bracing surrounding the passenger-side louver indention and the small center "bump" that holds the center tab for the hood insulation are the places where clearance is tight. The small dot, left of the center "bump" and the line drawn on the "bump" were made by pushing a permanent marker through the most worn part of the hood insulation. A little trim here and there should give ample clearance, even without using an engine restraint.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide