0309htp Turbo07 Z
Precision Turbo's TE44 - Big Spool More Fuel
The three front wires on the coil pack were popped off to give me a little more room, and its harness connector on the driver's side was undone with a 1/4-inch socket. While using caution to prevent damaging any nearby vacuum lines, I slowly lifted the coil pack assembly up and set it on the driver's side. A wayward vacuum line flatter than Kate Moss was found where the rear coil pack bolt had been tightened down--two cuts were made to remove the damaged area, and a piece of hose with zip ties on either end solved the problem.
View Related Article
|
|