GMHighTechPerformance Homepage

0311htp Projls1 08 Z

With the MAF off the car, now is a good time to remove the screen for maximum flow. There are no snap rings holding the screen in place, so you can gently push it out the back of the mass airflow sensor. Be sure to avoid the three elements in the center of the MAF; any damage done can cause serious problems. Be sure there is no extraneous debris in the sensor before replacing it. Once that is done, the MAF can be placed back into the intake tract resonator and the hose clamp can be tightened down.
LS-1 F-Body - Take the Money & Run

 With the MAF off the car, now is a good time to remove the screen for maximum flow. There are no snap rings holding the screen in place, so you can gently push it out the back of the mass airflow sensor. Be sure to avoid the three elements in the center of the MAF; any damage done can cause serious problems. Be sure there is no extraneous debris in the sensor before replacing it. Once that is done, the MAF can be placed back into the intake tract resonator and the hose clamp can be tightened down.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide