GMHighTechPerformance Homepage

0405htp Brakes 21 Z

A location on the driver-side inner fender was selected to mount the Master Power vacuum pump. Mike centered the unit, then marked three locations to drill. With the holes drilled, he test-fit the pump. Satisfied, it was bolted down with the supplied rubber mounts. The red wire from the pump was connected to one terminal of the pump's on/off switch, a power wire fused into the fusebox was connected onto the other side of the terminal, and a nearby bolt was used as a grounding point.
Master Power Brakes - Master Braker

 A location on the driver-side inner fender was selected to mount the Master Power vacuum pump. Mike centered the unit, then marked three locations to drill. With the holes drilled, he test-fit the pump. Satisfied, it was bolted down with the supplied rubber mounts. The red wire from the pump was connected to one terminal of the pump's on/off switch, a power wire fused into the fusebox was connected onto the other side of the terminal, and a nearby bolt was used as a grounding point.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide