GMHighTechPerformance Homepage

0407htp Projls1 27 Z

Once the studs are in, use a quality gasket maker to seal the cover to the rear end housing and install the supplied hardware. Don't forget to remount the support bracket and cover. Use some gasket sealer on the preload bolts and then torque them to 5 ft.-lbs. or 60 in.-lbs.
TransGo Shift Kit Install - Stall, Stab & Shift

 Once the studs are in, use a quality gasket maker to seal the cover to the rear end housing and install the supplied hardware. Don't forget to remount the support bracket and cover. Use some gasket sealer on the preload bolts and then torque them to 5 ft.-lbs. or 60 in.-lbs.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide