GMHighTechPerformance Homepage

0409htp Snow 07 Z

Based on input from Aeromotive I chose its part No. 13101 regulator. This is a very versatile regulator with large -10 ports. As I am using -6 line I used Aeromotive's -10 to -6 adapter fittings (part No. 15609). I removed the brass pipe plug to install an Auto Meter fuel pressure sender. The -6 port on the bottom is the return line port, the stainless steel nipple on the top right is for vacuum, and adjustments are made up top with an Allen wrench. Since I am running my rails in series, I capped off the fitting on the left.
LT1's Fuel System Modification - Project Snowball, Part III

 Based on input from Aeromotive I chose its part No. 13101 regulator. This is a very versatile regulator with large -10 ports. As I am using -6 line I used Aeromotive's -10 to -6 adapter fittings (part No. 15609). I removed the brass pipe plug to install an Auto Meter fuel pressure sender. The -6 port on the bottom is the return line port, the stainless steel nipple on the top right is for vacuum, and adjustments are made up top with an Allen wrench. Since I am running my rails in series, I capped off the fitting on the left.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide