GMHighTechPerformance Homepage

0410htp Lgm 29 Z

A cutoff wheel is used to remove the E-brake bracket that is attached to the lower control arm mounting bracket. Once that is done, the G2 control arm relocation brackets are bolted up. These brackets are needed because the G2 springs will lower the car about an inch and a half. That, in turn, will adversely change the pinion angle causing traction problems.
2002 Pontiac Trans Am - Operation: Apex Annihilation

 A cutoff wheel is used to remove the E-brake bracket that is attached to the lower control arm mounting bracket. Once that is done, the G2 control arm relocation brackets are bolted up. These brackets are needed because the G2 springs will lower the car about an inch and a half. That, in turn, will adversely change the pinion angle causing traction problems.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide