GMHighTechPerformance Homepage

0411htp Projls1 20 Z

The inlet was placed onto the pump and tightened down with the included Allen bolts. (Note: the thermostat IS NOT installed under it, it goes in the upper neck.) Next, the two Meziere heater hose fittings are screwed in and tightened.
LS1 Aftermarket MAF Sensor, Water Pump Install - Go With The Flow

 The inlet was placed onto the pump and tightened down with the included Allen bolts. (Note: the thermostat IS NOT installed under it, it goes in the upper neck.) Next, the two Meziere heater hose fittings are screwed in and tightened.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide