GMHighTechPerformance Homepage

0411htp Projls1 33 Z

Before installation, a flow comparison on SLP's new SuperFlow flow bench tested that statement. As we looked on, the T/A's factory 75mm MAF flowed 765 cfm at 25 inches of water, the SLP 85mm sucked 849 cfm. (The lower than rated atvacuum setting of 25 inches vs. 28 inches was necessary since SLP's MAF was exceeding the capacity of the flow bench before reaching 28 inches of vacuum.) That's an 84-cfm increase with screens!
LS1 Aftermarket MAF Sensor, Water Pump Install - Go With The Flow

 Before installation, a flow comparison on SLP's new SuperFlow flow bench tested that statement. As we looked on, the T/A's factory 75mm MAF flowed 765 cfm at 25 inches of water, the SLP 85mm sucked 849 cfm. (The lower than rated atvacuum setting of 25 inches vs. 28 inches was necessary since SLP's MAF was exceeding the capacity of the flow bench before reaching 28 inches of vacuum.) That's an 84-cfm increase with screens!  View Related Article

 

 

Get Adobe Flash player

Car Research Guide