GMHighTechPerformance Homepage

0506htp Degree 03 Z

Guiding the cam into the block is a little easier said than done. An extension tool is recommended to provide an adequate handling point. If you're only doing one cam install, you can get by using some longer bolts screwed into the snout of the cam. Installation requires precision, so be careful not to nick any cam bearings or cock the cam sideways during the install. Be patient.
How To: Properly Install And Degree An LS1 Cam And Timing Set

 Guiding the cam into the block is a little easier said than done. An extension tool is recommended to provide an adequate handling point. If you're only doing one cam install, you can get by using some longer bolts screwed into the snout of the cam. Installation requires precision, so be careful not to nick any cam bearings or cock the cam sideways during the install. Be patient.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide