GMHighTechPerformance Homepage

0506htp Degree 10 Z

To use the Comp indicator base on the Gen III and IV engine, you will need a 5-inch long piece of 3/4-inch (outside diameter) tubing and an old head bolt. The tube is bolted to the block and is used to support the indicator base fixture jig.
How To: Properly Install And Degree An LS1 Cam And Timing Set

 To use the Comp indicator base on the Gen III and IV engine, you will need a 5-inch long piece of 3/4-inch (outside diameter) tubing and an old head bolt. The tube is bolted to the block and is used to support the indicator base fixture jig.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide