GMHighTechPerformance Homepage

0511htp Blown 14 Z

After the wiring harness is disconnected from the injectors the 10mm bolts on the fuel rails are removed, the fuel line is disconnected using the supplied fitting, and the evap line is removed with pliers so that the fuel rails can come off. The supplied 38 lb/hr injectors replace the stock 26 pounders, the O-rings are greased with WD-40, and the intake is vacuumed so no dirt can potentially rip a gasket. The assembled fuel rails are pressed back into the intake by hand and reconnected.
Pontiac Trans Am - Blown Away Part II

 After the wiring harness is disconnected from the injectors the 10mm bolts on the fuel rails are removed, the fuel line is disconnected using the supplied fitting, and the evap line is removed with pliers so that the fuel rails can come off. The supplied 38 lb/hr injectors replace the stock 26 pounders, the O-rings are greased with WD-40, and the intake is vacuumed so no dirt can potentially rip a gasket. The assembled fuel rails are pressed back into the intake by hand and reconnected.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide