|
We needed provisions for an underhood nitrous pressure gauge, a nitrous purge solenoid, and a hookup for the nitrous feed line. For this to happen we had to come up with an array of adapters of various sizes. The main problem was that the line coming from the nitrous bottle had a 4 AN fitting on the bottle end and a 3 AN fitting on the solenoid end, and it would seem that nobody makes a 3 AN adapter fittings to install an inline purge solenoid and gauge. You can see in this photo that the nitrous feed line coming from the trunk hooks into the fitting array at the far right, a braided line running to the purge solenoid exits the bottom, a gauge is installed in the top of the fitting, and the braided line exiting to the left runs to the nitrous solenoid on the MAF. We spoke with Ricky about this problem, and NX created a part number (15605) for this specific system to have a purge. View Related Article
|
|