0601Htp Fast 15 Z
2001 Pontiac Trans Am Intake Manifold Nitrous Install - F.A.S.T. On The Gas
|
Using a 13/64-inch drill bit and 1 3/8-inch hole saw, the burst panel guides molded into the bottom of the lower half of the LSX intake are bored out. The purpose of having the ability for these passages to open up is that if a nitrous backfire were to ever occur, they would vent the excess pressure below the manifold instead of the manifold being exploded into so many plastic pieces. This scenario is far less likely with a direct-port system than with a "wet system" (where enrichment fuel is supplied within the manifold itself). One can never be too safe though. View Related Article
|
|
Chevy Corvette Research
Our comprehensive information will allow you to compare the new Chevy Corvette and review specs, photos and more. The 2010 Corvette goes for a suggested retail price of $74,285.00, and is available in the following bodystyles: Coupes, Convertibles. You may also be interested in the Chevy Camaro and the Pontiac G5.
|
|