0601Htp Fast 32 Z
2001 Pontiac Trans Am Intake Manifold Nitrous Install - F.A.S.T. On The Gas
|
As the distribution lines are connected, it's important to hold the jet fitting with a 3/8-inch wrench as the lines are tightened with a 7/16-inch wrench. This is impossible on some of the nozzles thanks to all kinds of crap in the way, and sometimes the nozzle itself must be held. If this must be done be careful not to over-tighten the line or the jet fitting can break (speaking from experience). Also, once fully tightened, the braided lines do not swivel, so get them all started on that cylinder bank (be careful not to cross-thread them) before finally tightening them all, or else attaching one may impede your being able to reach another. View Related Article
|
|
Chevy Corvette Research
Our comprehensive information will allow you to compare the new Chevy Corvette and review specs, photos and more. The 2010 Corvette goes for a suggested retail price of $74,285.00, and is available in the following bodystyles: Coupes, Convertibles. You may also be interested in the Chevy Camaro and the Pontiac G5.
|
|