GMHighTechPerformance Homepage

0603htp 15 Steering Shaft Z

The driver side on the GTO is cramped quarters, so in order to unbolt the manifolds and install the headers, the steering shaft will need to be unclipped and the rack dropped down. A 13mm socket and a flathead screwdriver are required for the shaft, but the rack requires 19mm and 18mm sockets...
A Sixer For The Road -- Technical -- GM High Tech Performance

 The driver side on the GTO is cramped quarters, so in order to unbolt the manifolds and install the headers, the steering shaft will need to be unclipped and the rack dropped down. A 13mm socket and a flathead screwdriver are required for the shaft, but the rack requires 19mm and 18mm sockets...  View Related Article

 

 

Get Adobe Flash player

Car Research Guide