GMHighTechPerformance Homepage

0603htp Flash 11 Z

Shift speeds at wide-open throttle (WOT) are set based on mph and rpm to initiate the shift. Different tables are used based on the area of operation (Normal Mode, Performance Mode, Cruise Mode, Hot Mode, 1 WOT). The mph table should be set first, then rpm. The settings are for the start of shifting, which takes time to complete, so the higher speed shifts are initiated earlier to allow completion prior to hitting the rev limiter.
Carputing ECM Editing Software - In A Flash

 Shift speeds at wide-open throttle (WOT) are set based on mph and rpm to initiate the shift. Different tables are used based on the area of operation (Normal Mode, Performance Mode, Cruise Mode, Hot Mode, 1 WOT). The mph table should be set first, then rpm. The settings are for the start of shifting, which takes time to complete, so the higher speed shifts are initiated earlier to allow completion prior to hitting the rev limiter.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide