GMHighTechPerformance Homepage

0603htp Hawk 03 Z

Looking more closely at the head studs, World Products has them threaded far below the LS7X's 0.750-inch-thick deck surface. "The head studs are counterbored so far down, you don't even have to use a torque plate on the block! In the GM blocks, they go about halfway down, but not nearly as far as ours; our studs thread clear from the bottom, as far as we can go," says Mitchell Jr. Looking for bore distortion? Look elsewhere.
World Products - LS7X - World At War

 Looking more closely at the head studs, World Products has them threaded far below the LS7X's 0.750-inch-thick deck surface. "The head studs are counterbored so far down, you don't even have to use a torque plate on the block! In the GM blocks, they go about halfway down, but not nearly as far as ours; our studs thread clear from the bottom, as far as we can go," says Mitchell Jr. Looking for bore distortion? Look elsewhere.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide