GMHighTechPerformance Homepage

Corvette Horsepower Steering Knuckle

Disconnect the coil pack harness and remove the spark plug wires from the plugs. Remove the coil pack assembly and then remove the PCV hose from the driver side valve cover by depressing the blue connector and lifting the hose up. Remove the valve cover and spark plugs and finish off by removing the steering knuckle with an 11mm wrench. Move the steering shaft as far away from the exhaust manifold as possible and remove the six 13mm exhaust manifold bolts.
Camshaft Installation - LS7 Bumpstick Complicity!

 Disconnect the coil pack harness and remove the spark plug wires from the plugs. Remove the coil pack assembly and then remove the PCV hose from the driver side valve cover by depressing the blue connector and lifting the hose up. Remove the valve cover and spark plugs and finish off by removing the steering knuckle with an 11mm wrench. Move the steering shaft as far away from the exhaust manifold as possible and remove the six 13mm exhaust manifold bolts.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide