GMHighTechPerformance Homepage

Ls1 Engine Build Rockers

Now bolt the rocker assembly to the stand. Each set of rockers is secured by a total of three bolts through its shaft: two stainless 5/16-18 bolts turned with a 3/8 12-point socket, and one 3/8-16 bolt turned with a so-called T50 Plus-a better version of Torx that has more rounded edges at the points. (Jesel is nice enough to supply a T50 Plus socket for you to use.) Again, all of these are quality ARP bolts.
My First Stroker Part 3 - LS1 Engine Build

 Now bolt the rocker assembly to the stand. Each set of rockers is secured by a total of three bolts through its shaft: two stainless 5/16-18 bolts turned with a 3/8 12-point socket, and one 3/8-16 bolt turned with a so-called T50 Plus-a better version of Torx that has more rounded edges at the points. (Jesel is nice enough to supply a T50 Plus socket for you to use.) Again, all of these are quality ARP bolts.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide