|
We found that the stock throttle cable bracket wouldn't work with our new Holley throttle body, as it sat too far back to allow the throttle to completely close (even messing with the cable adjuster wouldn't give us enough slack). Never fear: Holley's provided throttle cable bracket (absent from our previous photo thanks to us "misplacing" it) provides the solution. It bolts not to the molded-in location on the manifold, but to the upper left throttle body bolt and the front intake bolt. This moves it forward enough to allow the cable to properly reach. Holley also includes a longer bolt and spacer to move the throttle cable bracket even further forward if need be (nitrous plate being used, etc.). View Related Article
|
|