GMHighTechPerformance Homepage

Ls1 Engine Build

Ls1 Engine Build
Ls1 Engine Build - My First Stroker Part 4
The ends of the controller's cables look as follows. In the upper right of the photo we see the serial in/out ports, to which connect either the provided 2.5mm male terminal plug and/or the provided 2.5mm stereo to DB-9 cable (the other end of which hooks to your laptop computer). As to the seven wires emerging from the thick shielded cable, they'll be tapped in as follows: red to an ignition-switched 12V source; blue (the sensor heater ground) will go to the chassis; black is the calibration wire that we'll be wiring to ground through a momentary switch and LED; white and green are system and analog grounds and will wire to our EFILive FlashScan cable; and yellow is the analog output and will also wire to our EFILive cable, providing EFILive with a voltage signal that will be translated into AFR. (The brown wire is a second analog output and won't be used in this application.) View Related Article
Ls1 Engine Build Ls1 Engine Build Fluid Levels Ls1 Engine Build Spark Plug Ls1 Engine Build Ls1 Engine Build Oil Ls1 Engine Build Ls1 Engine Build
Ls1 Engine Build Controller Kit Ls1 Engine Build Controller Box Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Controller Box
Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build
Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build
Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build Ls1 Engine Build

 

Chevy Corvette Research
Chevy Corvette Our comprehensive information will allow you to compare the new Chevy Corvette and review specs, photos and more. The 2010 Corvette goes for a suggested retail price of $74,285.00, and is available in the following bodystyles: Coupes, Convertibles. You may also be interested in the Chevy Camaro and the Pontiac G5.
Get Adobe Flash player