Efi Live
EFI Live Programmer - Brainwashed
After setting up a tune file for speed density, the EFI Live scan tool needs to be configured as well. The shown activated PID (parameter identifier) list is a good starting point, listing the basics needed for speed density data logging. The scanner first must be configured to read and capture the external wideband signal, as delivered by our FAST meter. The FAST meter output works with EFI Live's pre-configured PID: "AFR-LM1," and the corresponding ratio of "measured AFR/commanded AFR," known as the "Base Efficiency Numerator--LM1" (BEN) PID. View Related Article
|
|