Header Installation
Header Installation - Solely Stainless, Totally Tubular
|
With everything loosely in place down below, we can final-tighten the headers. Put some thread locker on each bolt, and torque each header in a center-outward pattern to 11 lb-ft and then 18 lb-ft. With all bolts tight, you will need to proceed underneath to check that pipe spacing is still accurate; if it is off, you might have to improvise by loosening the headers and tightening one before the other. You may even have to do what we did, and insert a wooden board between the x-pipe and frame to keep it roughly centered while tightening. Be patient, but be sure not to let the thread locker dry. View Related Article
|
|
Chevy Corvette Research
Our comprehensive information will allow you to compare the new Chevy Corvette and review specs, photos and more. The 2010 Corvette goes for a suggested retail price of $74,285.00, and is available in the following bodystyles: Coupes, Convertibles. You may also be interested in the Chevy Camaro and the Pontiac G5.
|
|