GMHighTechPerformance Homepage

1996 Ta Remove

1996 Ta Remove

1996 Pontiac Trans Am - Mad ETS - Tech
The high-quality street torque arm is removed next. The 13mm bolt that attaches the front of the torque arm mount to the transmission is removed (15mm on manual transmission). Carefully unhinge the metal clamshell retainer holding the torque arm bushing. A pole jack is placed under the Panhard-bar mount on the rearend housing to take the pressure off of the torque arm mounts. Brian Jeffery holds a box end wrench on the two 7-inch bolts, while chassis technician Nick Williamson uses an impact gun to remove the two nuts with a 21mm socket. After the bolts are removed, the torque arm can be lowered and taken out. View Related Article
1996 Ta 1996 Ta Baseline 1996 Ta Install 1996 Ta Remove 1996 Ta Torque Arm 1996 Ta Unique 1996 Ta Rod End
1996 Ta Crossmember 1996 Ta Control Arm 1996 Ta Shocks 1996 Ta Adjust 1996 Ta Center 1996 Ta Installed 1996 Ta Testing

 

 

Get Adobe Flash player

Car Research Guide