|
Though it was not my intention to install a Panhard bar at this time, the factory's off-center rearend orientation (as evidenced by the unequal gaps in the rear wheelwells) necessitated an adjustable version for floorpan clearance with the torque arm. Thankfully, BMR was able to overnight this single-adjustable chrome-moly unit (PN MPHR002) with polyurethane bushings, and we were back in business. Jason measured the distance from the inner wheelwell to the outside of the tire on both sides, and kept adjusting the nut until dead center was found. After tightening down the locking nuts and using a little red Loctite, all the bushings were greased, and we were done. View Related Article
|
|