GMHighTechPerformance Homepage

1999 Chevy Corvette

A&A recommended staying with the stock 1.7 ratio rocker arms since they are lighter than aftermarket variants and will work well with the cam. Teflon sealant is placed on the intake rockers to prevent oil from being sucked into the motor. The stock pushrods were also reused, which should help minimize valvetrain noise, but a hardened set will provide greater reliability.
1999 Chevrolet Corvette - Unlocking The Combination - Tech

 A&A recommended staying with the stock 1.7 ratio rocker arms since they are lighter than aftermarket variants and will work well with the cam. Teflon sealant is placed on the intake rockers to prevent oil from being sucked into the motor. The stock pushrods were also reused, which should help minimize valvetrain noise, but a hardened set will provide greater reliability.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide