GMHighTechPerformance Homepage

2001 Pontiac Trans Am

After making any necessary tweaks to the brake lines on the driver side (none needed for us), set the driver side of the brace, then tighten it down using the stock nuts and provided washers (torque spec is 32 lb-ft). All in all, the only change we had to make underhood was to add a 90-degree fitting to our aftermarket fuel pressure gauge--now that's a simple install!
2001 Pontiac Trans Am - Suspension Intervention - Tech

 After making any necessary tweaks to the brake lines on the driver side (none needed for us), set the driver side of the brace, then tighten it down using the stock nuts and provided washers (torque spec is 32 lb-ft). All in all, the only change we had to make underhood was to add a 90-degree fitting to our aftermarket fuel pressure gauge--now that's a simple install!  View Related Article

 

 

Get Adobe Flash player

Car Research Guide