GMHighTechPerformance Homepage

2001 Chevy Camaro

The accelerator and dead pedals utilize self-tapping screws to retain the new pedals. Simply place the AutoVation pedals over the originals, adjust them, and start screwing. Pull the rubber covers off of the clutch and brake pedals, place the AutoVation pedals in the desired locations, mark them, and begin drilling with a 3/16 bit. You'll want to use smaller pilot bits to get the holes started. Bolt the clutch/brake pedals into place with the included hardware and 3/32 Allen wrench.
2001 Chevrolet Camaro - STREET CAR, TRACK CAR: PART II - Tech

 The accelerator and dead pedals utilize self-tapping screws to retain the new pedals. Simply place the AutoVation pedals over the originals, adjust them, and start screwing. Pull the rubber covers off of the clutch and brake pedals, place the AutoVation pedals in the desired locations, mark them, and begin drilling with a 3/16 bit. You'll want to use smaller pilot bits to get the holes started. Bolt the clutch/brake pedals into place with the included hardware and 3/32 Allen wrench.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide