GMHighTechPerformance Homepage

2005 Pontiac Gto

It was time to begin a full "dry run" of the installation. The CNC-machined aluminum caliper mounting bracket bolts in place using the stock bolts along with Wilwood's provided shims underneath (one thin shim per bolt for now). We oriented the bracket so that the flat side faced away from the rotor. Note: Wilwood said to use the factory washers under these bolt heads, but our bolts didn't have any. Again, since this is a test fit, nothing is being final-tightened yet.
2005 Pontiac GTO - Speed Slayer

 It was time to begin a full "dry run" of the installation. The CNC-machined aluminum caliper mounting bracket bolts in place using the stock bolts along with Wilwood's provided shims underneath (one thin shim per bolt for now). We oriented the bracket so that the flat side faced away from the rotor. Note: Wilwood said to use the factory washers under these bolt heads, but our bolts didn't have any. Again, since this is a test fit, nothing is being final-tightened yet.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide