GMHighTechPerformance Homepage

2005 Pontiac Gto

The caliper was then slid on and its mounting bolts torqued to a Wilwood-specified 47 lb-ft. These nuts do not need threadlocker as they are locknuts (kudos to Wilwood for this). Note also that Wilwood said to install the caliper with the bleed screws facing up, but since these are four-piston units, they will have two on the top and two on the bottom no matter what!
2005 Pontiac GTO - Speed Slayer

 The caliper was then slid on and its mounting bolts torqued to a Wilwood-specified 47 lb-ft. These nuts do not need threadlocker as they are locknuts (kudos to Wilwood for this). Note also that Wilwood said to install the caliper with the bleed screws facing up, but since these are four-piston units, they will have two on the top and two on the bottom no matter what!  View Related Article

 

 

Get Adobe Flash player

Car Research Guide