GMHighTechPerformance Homepage

2005 Pontiac Gto

In bleeding each front caliper, bleed first using the outboard bleed screw (shown), followed by the inboard bleed screw. Thanks to the natural upward movement of air bubbles in a fluid, it is only necessary to use the upper bleeders; ignore the lower ones, just make sure they are tight. (This same advice goes for the rear calipers, by the way.) The front wheels were reinstalled, and we're done!
2005 Pontiac GTO - Speed Slayer

 In bleeding each front caliper, bleed first using the outboard bleed screw (shown), followed by the inboard bleed screw. Thanks to the natural upward movement of air bubbles in a fluid, it is only necessary to use the upper bleeders; ignore the lower ones, just make sure they are tight. (This same advice goes for the rear calipers, by the way.) The front wheels were reinstalled, and we're done!  View Related Article

 

 

Get Adobe Flash player

Car Research Guide