In order to keep the switch hidden and easy to install,... | 
...and to allow room for other switches later on,... | 
...we mounted it beside the trunk release button on the underside of the driver-side dash. |
With a DOT 4 rating, 311/470-degree wet/dry boiling point, and compatibility with factory fluid, Quaker State Heavy Duty Brake Fluid will definitely do the job. | 
Even with all the fluid lost in the process of swapping the lines and bleeding the brakes, two 12-ounce bottles are more than enough. Remember: When bleeding, start with the farthest line from the master cylinder and work forward. | 
The StreetFighter lockup converter (PN 243105, $681) with a stall speed of 3,200-3,500 should drop the Formula's e.t.'s substantially. While we were at it, we figured we'd throw in an SFI-approved flexplate, and TCI was happy to accommodate with PN 399173, $121. |