Transfer the bottle nut from the standard nitrous siphon tube over to the nano system. | 
Once complete, get out the nano cylinder, which is equipped with a Nitrous Pressure Compensator that features an on/off knob and a 6,000-psi pressure gauge. Direct from nano, the cylinder was full of high-pressure air (hpa) and was set to 4,500 psi. Although high-pressure nitrogen (hpn) may be used, nano recommends hpa, as it is readily available and typically $3-$5 at most paintball and scuba shops. In addition, if you are pals with any firefighters, inquire about the scba re-fillers common at almost any fire station across the country. | 
Connect the included 12-inch hpa supply line and attach it to the nano cylinder with a 7/16-inch wrench. |
The nano cylinder can be mounted "piggyback" onto your existing nitrous bottle or anywhere within the range of the 12-inch hose. Since the '02 ta's nitrous bottle was equipped with a Wolfe racecraft 10-point rollcage, the driver-side tube proved to be the perfect place to mount the two supplied brackets. | 
After verifying the 12-inch supply line would reach the nitrous bottle, the nano bottle is centered in the mounting brackets. | 
A 1/2-inch socket secures the bottle. |
Equipped with an aerospace Components billet nitrous bottle bracket, the owner slips the bottle into the bracket and inserts the mounting pins. | 
While the nano regulator is turned off, the 12-inch supply line is fitted to the nitrous bottle with an 11/16-inch wrench. In addition to pressurizing the system once the valve is opened, it should be noted that the nano system contains an anti-reversion valve at this connection. In layman's terms, you won't lose precious nitrous or hpa when disconnecting the nitrous bottle in order to refill it. | 
The nitrous line that feeds the engine is then screwed onto the bottle nipple and tightened. The universal kit utilizes a modified Nos superhiflo valve that will sustain a flow rate of 0.45 pounds of nitrous oxide per second. According to Darnell, "this typically takes care of up to 550 hp (a 550 shot), and for even greater nitrous flow, our evil-twin kit will flow .70 pounds per second, good for roughly 850 hp." |