Nitrous Oxide Regulation System - Nitrous Pressure Games

Drag Results
Tests were at Texas Raceway in Kennedale, Texas, which features a wellprepared eighth-mile track. In order to ensure consistency in testing, two full 10-pound nitrous bottles were brought to the test site. Both bottles were manufactured by Nitrous express; the only difference was that one bottle was set up with NANO-supplied hardware. For the initial set of tests, the bottle without NANO was tested. Prior to staging, a bottle heater was employed to raise the nitrous pressure to 1,200 psi, and upon purging the bottle pressure dropped to the manufacturer's recommendation of 1,050 psi. At the completion of each run the bottle heater was turned back on and the process was repeated for the three recorded runs. In all runs the bottle pressure was 1,050 psi upon launch, and it fell to 850 psi at the end of the track.

For the NANO tests, no bottle heater was used. Upon opening the NANO and setting the pressure to 1,050 psi, the bottle maintained that pressure after purging. A total of three runs were recorded with the NANO and the bottle pressure remained at 1,050 from the beginning to the end of the run.