|
Moser supplied our nodular case setup with a 3.70 Motive Gear ring-and-pinion and Truetrac differential, a gear-type unit that won't wear out like clutch-style posis. Schedule your hernia surgery in advance, as the weight of this sucker alone is 80 pounds. An aluminum case is also available for weight savings, though Moser did not recommend this for our soon-to-be-nitrous-injected application. We find that it is a bit challenging to install onto the studs. Even with them perfectly lined up, tolerances are so tight that we had to resort to careful hammering of the case to guide it on enough to start the nuts, then pull it down the rest of the way turn by turn. The ten nuts were tightened with washers underneath, and we used some threadlocker just to be safe. View Related Article
|
|