|
The stock rotors slide on, and the stock calipers are installed and torqued to stock spec (74 ft-lb). Moser, unfortunately, supplies no provisions for brake-line attachments. Without going into too much detail, we'll just say that we were able to make some modifications to the stock bracket where the lines come from the body (left of hands in photo) and attach it to one of the studs securing the pumpkin. The brake lines themselves fit the contours of the rear more or less well, though another bracket was added atop the rear after this photo was taken to help keep things in place. Here I zip tie the factory ABS wiring harness to the brake lines. View Related Article
|
|