GMHighTechPerformance Homepage

Rust Bandsaw

A band saw is by far the best way to cut sheetmetal; unfortunately most run too fast to cut steel, this one runs about 180 surface feet per minute, which cuts through 18 gauge like butter. I started this project with a Bosch jigsaw, which worked ok, but the band saw was a massive improvement in speed, accuracy, and convenience.
1989 Pontiac Formula - Corrosion Cure

 A band saw is by far the best way to cut sheetmetal; unfortunately most run too fast to cut steel, this one runs about 180 surface feet per minute, which cuts through 18 gauge like butter. I started this project with a Bosch jigsaw, which worked ok, but the band saw was a massive improvement in speed, accuracy, and convenience.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide