2008 Pontiac G8 Gt Procharger Ho Intercooled Supercharger System Install Tighting Clamps For Supercharger
|
Once necessary adjustments are made, all clamps are tightened onto the tubes. The intercooler is final tightened on its brackets at this point as well. A note on the final piece of rubber hose connecting the outlet of the second steel tube to the inlet of the intercooler: it can't be fully round as it passes through a somewhat tricky area between the A/C condenser and frame, so a metal tube would be inappropriate here for the configuration of this kit. It is this area that must be notched to allow use of the optional 3-core intercooler. ProCharger's Jeff Lacina-also present during the install but hiding from being photographed-points out that the great thing about this kit (with its standard 2-core intercooler) is that it's easy to bolt right up to a stock car, with no permanent modifications needed. View Related Article
|
|