GMHighTechPerformance Homepage GM High Tech Performance
Facebook Click here to find out more!

Cylinder Head Ports Closeup Of Ports

 
Cylinder Head Ports Closeup Of Ports
Cylinder Head Ports Closeup Of Ports
...A titanium retainer is used along with a Super 7 valve lock and Viton seals. West Coast says these high-flowing heads can easily make 640 hp with a 402, however the factory intake manifold severely limits its potential. View Related Article
Cylinder Head Being Machined Ls3 Cylinder Heads Being Machined West Coast Cylinder Heads Stage 2 Cnc Program Cylinder Head Closeup Cylinder Heads After Machining Cylinder Head Springs Closeup Patriot Extreme Dual Springs Cylinder Head Ports Closeup Of Ports 2009 Chevrolte Corvette C6 C6 Vette On Dyno Removing Coil Packs Radiator Emptying Into A Bucket Below
Removing Fuel Rails Using 10Mm Wrench To Remove Fuel Rails Ls3 Manifold Removing Stock Intake Manifold Removing Water Pump Alternator And Power Steering Bracket Removed Too Unbolting Headers Removing Headers From Bottom Unbolting Old Cylinder Heads Using 8Mm Socket To Remove Bolts Still Removing Bolts Still Removing Cylinder Head Bolts Removing Cylinder Head Once All Bolts Are Removed The Cylinder Heads Were Removed
Closeup Of Combustion Chamber Ls3 Combustion Chamber Sucking Out Engine Coolant Getting Coolant Out Of The Head Bolt Holes Using Thread Cleaner Cleaning Head Bolt Holes West Coast Cylinder Heads And Gaskets Cylinder Heads And New Gaskets Factory Head Gasket Able To Handle 900 Rwhp Treated Arp Bolts Using Moly Lube Torquing Bolts Installing New Bolts
Tighting Stock Rocker Arms Using 22 Ft Lbs Of Torque Spraying Stock Gaskets Using Copper Sealant Spray Torque Header Bolts Using 18 Ft Lbs Pumping Reservoir Fluid Filling With Reservoir Fluid Dyno Results New Header Dyno Results Dyno Results Old Cylinder Heads Results

 
Get Adobe Flash player
GM High-Tech Performance