GMHighTechPerformance Homepage

2003 Chevy Corvette Testing On Dyno

2003 Chevy Corvette Testing On Dyno
Chevy Corvette C5 Simple Bolt-On Upgrades - Nip Tuck
Bob Moran's bone stock 2003 Corvette registered 274.5 hp and 306.6 lb-ft of torque on East Coast Supercharging's new Dynapack 4000 model chassis dyno. This load-bearing dyno is rated up to approximately 1,100 hp, which co-owner Doug Ring says has been invaluable for tuning and much more effective in getting accurate numbers from the lightweight Corvettes, otherwise prone to tire spin. View Related Article
Working On Rocker Arms For A Ls1 Engine 2003 Chevy Corvette Testing On Dyno Halltech C5 Venom Cold Air Intake For About 350 Dollars Removing Stock Intake Off For A 2003 Chevy Corvette Removing The Maf So It Can Be Moved Installing Intake And Filter And Sercuring With Clamps Dyno Chart On Hp Gained From Cold Air Intake
Stainless Works Cr Turbo Muffler System Unbolting Rear Sway Bar To Remove Stock Cat Back Unbolting Catback So We Can Remove Muffler Removing Stock Muffler From Our C5 Project Vehicle Bolting Up New Muffler And Connecting Them With Band Clamps Dual Daulexhaust Tips Are Tweaked Till There Straight Under Carrage View Of Stainless Works Muffler System
Dyno Chart On Stainless Works Muffler System Comp Cams Ultra Gold Rocker Arms Comp Cams Valvesprings Coil Packs Removed And The Valve Covers Stock Rockers Removed With Socket Pulling Out Rockers And Making Sure There All Out Compressing Springs And Removing Them
Mounting Rockers With The Stud Torqued Rockers To 28 Ft Lbs Using Efi Live To Tune Engine Dyno Chart Of Hp Gained From Roller Rockers

 

Chevy Corvette Research
Chevy Corvette Our comprehensive information will allow you to compare the new Chevy Corvette and review specs, photos and more. The 2010 Corvette goes for a suggested retail price of $74,285.00, and is available in the following bodystyles: Coupes, Convertibles. You may also be interested in the Chevy Camaro and the Pontiac G5.
Get Adobe Flash player